Hydroxyethyl Methyl Cellulose (MHEC) 100K
Hydroxyethyl Methyl Cellulose (MHEC) 100K is middle viscosity Hydroxyethyl methyl cellulose, It’s mainly recommended for cement based skim coats.
•Sufficient water retention
•Good adhesion strength.
•Improves the workability
•Significant slip resistance
•Longer open time
|Chemical Name||Hydroxyethyl Methyl Cellulose|
|Appearance||White or off-white powder|
|Moisture content||≤6 ％|
|Ash content||≤5 ％|
|Particle size||99% pass 80 mesh|
|Viscosity||85,000-110,000 mPa.s (NDJ-1, 2% solution, 20℃)|
|45,000-60,000 mPa.s (Brookfield-RV, 2% solution, 20℃)|
•Cement render and plaster
•Consistency development: very fast
•Final consistency: low
•Sag resistance: moderate
•Water demand: moderate
•Water retention: very high
•Cement retardation: low
•Heat stability: standard
Packaging and storage
Standard packed in 25 KG per paper plastic composite bag
Big bags or other special packages are possible on request
Weight/20′ container: approx. 10 metric tons with pallets, approx. 14 metric tons without pallets
Weight/40′ container: approx. 24 metric tons with pallets, approx. 26 metric tons without pallets
Stored in its original packaging in a dry and place with temperature below 30℃.
It is recommended to use SLEO® MHEC within 2 years.
The data presented above is in accordance with the present state of our knowledge, but doesn’t absolve the user from carefully checking it all immediately on receipt. We reserve the right to alter product constantly within the scope of technical progress or new developments. The recommendations made above should be checked by preliminary trials because of conditions during processing over which we have no control of, especially where other companies’ raw materials are also being used.