Hydroxypropyl Methyl Cellulose (HPMC) 200K
Hydroxypropyl Methyl Cellulose (HPMC) 200K is high viscosity hydroxypropyl methyl cellulose, It’s mainly recommended for cost effective cement based tile adhesives.
Hydroxypropyl Methylcellulose (HPMC) 200K can Extended open time and wettability,Improved workability without sticking trowel,Improved adhesive strength and slip-resistance,Enhanced sag-resistance and water retention.
|Chemical Name||Hydroxypropyl methyl cellulose|
|Appearance||White or off-white powder|
|Moisture content||≤6 ％|
|Ash content||≤5 ％|
|Methoxy content||19-24 ％|
|Hydroxypropyl content||4-12 ％|
|Particle size||99% pass 80 mesh|
|Viscosity||185,000-215,000 mPa.s (NDJ-1, 2% solution, 20℃)|
|65,000-80,000 mPa.s (Brookfield-RV, 2% solution, 20℃)|
•Tile adhesives, cost effective
•Adhesives for block laying
•Consistency development: very fast
•Final consistency: moderate
•Sag resistance: moderate
•Water demand: moderate
•Water retention: very high
•Cement retardation: low
•Heat stability: standard
Packaging and storage
Standard packed in 25 KG per paper plastic composite bag
Big bags or other special packages are possible on request
Weight/20′ container: approx. 10 metric tons with pallets, approx. 14 metric tons without pallets
Weight/40′ container: approx. 24 metric tons with pallets, approx. 26 metric tons without pallets
Stored in its original packaging in a dry and place with temperature below 30℃.
It is recommended to use SLEO® HPMC within 2 years.
The data presented above is in accordance with the present state of our knowledge, but doesn’t absolve the user from carefully checking it all immediately on receipt. We reserve the right to alter product constantly within the scope of technical progress or new developments. The recommendations made above should be checked by preliminary trials because of conditions during processing over which we have no control of, especially where other companies’ raw materials are also being used.