Hydroxypropyl Methyl Cellulose (HPMC) 200S

  1. Home
  2. Products
Hydroxypropyl Methyl Cellulose (HPMC) 200S

Hydroxypropyl Methyl Cellulose (HPMC) 200S

Hydroxypropyl Methyl Cellulose (HPMC) 200S is high viscosity hydroxypropyl methyl cellulose delayed solubility, It’s mainly recommended for floor cleaners, detergents and dishwashing agents. Chemical Name Hydroxypropyl methyl cellulose Appearance White or off-white powder Delayed Solubility Yes Moisture content ≤6 % Ash content ≤5 % Methoxy content 19-24 % Hydroxypropyl content 4-12 % pH value 6-8 Particle […]

Hydroxypropyl Methyl Cellulose (HPMC) 200S is high viscosity hydroxypropyl methyl cellulose delayed solubility, It’s mainly recommended for floor cleaners, detergents and dishwashing agents.

Chemical Name Hydroxypropyl methyl cellulose
Appearance White or off-white powder
Delayed Solubility Yes
Moisture content ≤6 %
Ash content ≤5 %
Methoxy content 19-24 %
Hydroxypropyl content 4-12 %
pH value 6-8
Particle size 99% pass 80 mesh
Viscosity 185,000-215,000 mPa.s (NDJ-1, 2% solution, 20℃)
65,000-80,000 mPa.s    (Brookfield-RV, 2% solution, 20℃)

Recommended Applications

•Floor cleaners

•Detergents

•Dishwashing agent

Application Performance

•Consistency development: fast

•Final consistency: low

•Water demand: low

•Water retention: very high

•Heat stability: very high

Packaging and storage
Standard packed in 25 KG per paper plastic composite bag
Big bags or other special packages are possible on request

Weight/20′ container: approx. 10 metric tons with pallets, approx. 14 metric tons without pallets
Weight/40′ container: approx. 24 metric tons with pallets, approx. 26 metric tons without pallets

Stored in its original packaging in a dry and place with temperature below 30℃.

It is recommended to use SLEO® HPMC within 2 years.

Safety notes

The data presented above is in accordance with the present state of our knowledge, but doesn’t absolve the user from carefully checking it all immediately on receipt. We reserve the right to alter product constantly within the scope of technical progress or new developments. The recommendations made above should be checked by preliminary trials because of conditions during processing over which we have no control of, especially where other companies’ raw materials are also being used.

Inquiry