VAE Re-dispersible Polymer Powder 5016
SLEO® SL-RD5016 redispersible polymer powders are free flowing white powders obtained by spray drying macromolecular copolymer dispersions under carefully defined conditions. They are widely used to improve cohesion, adhesion, flexibility and workability in constructions especially in dry mixtures.
VAE Re-dispersible Polymer Powder 5012
SLEO® SL-RD5012 redispersible polymer powders are free flowing white powders obtained by spray drying macromolecular copolymer dispersions under carefully defined conditions. They are widely used to improve cohesion, adhesion, flexibility and workability in constructions especially in dry mixtures.
Hydroxyethyl Methyl Cellulose (MHEC) 100K
Hydroxyethyl Methyl Cellulose (MHEC) 100K is middle viscosity Hydroxyethyl methyl cellulose, It’s mainly recommended for cement based skim coats.
•Sufficient water retention
•Good adhesion strength.
•Improves the workability
•Significant slip resistance
•Longer open time
Hydroxyethyl Methyl Cellulose (MHEC) 200K
Hydroxyethyl Methyl Cellulose (MHEC) 200K is high viscosity Hydroxyethyl methyl cellulose, It’s mainly recommended for cement based tile adhesives.
•Sufficient water retention
•Good adhesion strength.
•Improves the workability
•Significant slip resistance
•Extended open time
Hydroxypropyl Methyl Cellulose (HPMC) 200S
Hydroxypropyl Methyl Cellulose (HPMC) 200S is high viscosity hydroxypropyl methyl cellulose delayed solubility, It’s mainly recommended for floor cleaners, detergents and dishwashing agents.
High light transmittance
Delayed solubility for viscosity control
Fast cold water dispersion
Good emulsification
Significant thickening effect
Security and stability
Hydroxypropyl Methyl Cellulose (HPMC) 150K
Hydroxypropyl Methyl Cellulose (HPMC) 150K leads to high sag resistance and long embedding time, which are the required key properties of EIFS and ETICS.
• Hydroxypropyl Methyl Cellulose (HPMC) 150K allows better sag resistance means that mortar can be applied more efficiently to walls without sag.
• Better leveling and reduced stickiness of cellulose can be applied easily to thick layers of EIFS and ETICS.
Hydroxypropyl Methyl Cellulose (HPMC) 100K
Hydroxypropyl Methyl Cellulose (HPMC) SLEO 100K is middle viscosity hydroxypropyl methyl cellulose, It’s mainly recommended for cement based skim coats/ wall putty.
Thickening: thicken putty powder to enhance its suspension ability, anti-sagging ability as well as keep the solution uniform.
Water retention: keep the putty powder in a moist state and make the auxiliary ash calcium react under the action of water.
Lubrication: has a lubricating effect, which can make the putty powder have good workability, keep it smooth and human-energy saving during the construction process.
Hydroxypropyl Methyl Cellulose (HPMC) 200K
Hydroxypropyl Methyl Cellulose (HPMC) 200K is high viscosity hydroxypropyl methyl cellulose, It’s mainly recommended for cost effective cement based tile adhesives.
Hydroxypropyl Methylcellulose (HPMC) 200K can Extended open time and wettability,Improved workability without sticking trowel,Improved adhesive strength and slip-resistance,Enhanced sag-resistance and water retention.