Latest News

  1. Home
  2. News

High Viscosity HPMC Hydroxypropyl Methyl Cellulose Thickener For Putty Powder

SLEOCHEM has a lot of kinds of HPMC, according to your requirements, we can customize the production of viscosity 5~250,000 (NDJ-4, 2% aqueous solution, 25℃), different gel temperature of HPMC. And for different applications, we develop special putty, ceramic tile special, waterproof mortar special, ceramic tile sealant dedicated, polypropylene rubber powder dedicated, insulation bonding special, […]

READ MORE...

Cellulose Ether for Detergent / Washing Up Liquids–Home Care

Cellulose ether has good characteristics such as thickening, suspension, dispersion, emulsification, adhesion, film formation, moisture protection, and protective colloid. Cleaners and detergents: Use of celopro cellulose ethers provides viscosity control, cling, foaming, soil anti-redeposition, and emulsion stabilization to household cleaners and detergents. Liquid and Gelled Soaps: In liquid bathroom soaps and in gelled soaps (“waterless” […]

READ MORE...

HPMC Used in Tile Grouts

The cellulose ether is a polymer compound having an ether structure made of cellulose, and each glucosyl ring in the cellulose macromolecule contains three hydroxyl groups, a primary hydroxyl group on the sixth carbon atom, and a second or three carbon atoms. The secondary hydroxyl group, the hydrogen in the hydroxyl group is substituted with […]

READ MORE...

High quality Putty powder additive Chemicals Hydroxypropyl methylCellulose Hpmc

HPMC is a non-ionic ,water soluble cellulose ether that form films, water-retentions, stability, adhesiveness, especially widely used for construction materials because it is chosen to enhance adhesion, water retention, and lubricity, shrink and crack resistance. Modified cellulose ethers improve on the slippage, brittle resistance to pressure and tensile sex. Therefore, for cement and plaster based […]

READ MORE...

Cellulose Ether HPMC in Self-Leveling

The cellulose ether is a polymer compound. For more than 60 years, these products have played a significant role in a host of applications, from construction products, ceramics, and paints to foods, cosmetics, and pharmaceuticals. HPMC has low viscosity and is widely used in self-leveling. Self leveling is a very advanced construction technology. As the […]

READ MORE...

Cellulose Ether in Wall Putty

Wall putty is a material for filling the imperfections and smoothing the surface of walls. It is a cement-based fine powder that is indispensable before painting. Its excellent adhesion and tensile strength can extend the life of the wall paint. It can be used on both dry and wet walls, and also be applied on […]

READ MORE...

Cellulose ether’s influence on water retention in mortars

Cellulose ether (CE) is commonly used as additives to improve the quality of mortars. As admixtures, It improves the properties of mortars such as water retention, workability, and open time. The water retention of mortar refers to the ability of mortar to preserve water. The mortar with good water retention has sufficient hydration of the […]

READ MORE...

What are the Different Types of Tile Adhesive?

Selecting the correct tile adhesive is just as important as selecting the right tile for the project. The job of the adhesive is to bond the bottom of the tile to a surface, called the setting bed. In the last few years, there have been vast improvements in adhesives which make it easier for people […]

READ MORE...

How to Choose the Correct Tile Adhesive

Whether wall or floor tile, that tile needs to thoroughly stick to its base surface. Demands placed on tile adhesive are both extensive and steep. Tile adhesive is expected to hold the tile in place not just for years but for decades—without fail. It must be easy to work with, and it must adequately fill […]

READ MORE...

The influence of cellulose ether on tile adhesive

1. Introduction Cement-based tile adhesive is currently the largest application of special dry-mix mortar. It is composed of organic or inorganic additives such as cement as the main cementing material and supplemented by graded aggregates, water-retaining agents, early strength agents, and latex powders. mixture. Generally, it only needs to be mixed with water when used. […]

READ MORE...