Cement Tile adhesives (CTA) are used to install tiles in residential and commercial buildings on floors or on walls.
Depending on the local construction technology, regional needs and building traditions, the choice of raw material, critical performance criteria as well as norms and regulations for testing adhesives can differ from country to country.
Depending on the requirements cementitious tile adhesives are either classified as C1 to achieve minimum values of 0.5N/mm² or as C2 with adhesion strengths of at least 1.0N/mm² respectively.
Our Hydroxypropyl Methylcellulose (HPMC) 200K/Methyl Hydroxyethyl Cellulose (MHEC) 200K cellulose products can Extended open time and wettability,Improved workability without sticking trowel,Improved adhesive strength and slip-resistance,Enhanced sag-resistance and water retention.
It offers a number of benefits to the wet and dry-mortar properties of tile adhesives. When the dry-mix mortar is mixed with the required amount of water, VAE Re-dispersible Polymer Powder is completely in the aqueous phase. This is the precondition for a homogeneous film formation of the polymer during the subsequent setting of the mortar. In addition to the cement matrix the polymer matrix contributes to the bonding and compressive strength of the mortar.
VAE Re-dispersible Polymer Powders are required in tile adhesive applications where – especially on different substrates – adhesion strength needs to be improved or special technical requirements (e.g. heat conditioning) have to be fulfilled. They also impart high flexibility or impact resistance and improved abrasion resistance once the mortar has hardened. Additionally, some tile adhesive formulations contain special performance VAE Re-dispersible Polymer Powder which improve either the water repellency characteristics or the free flowing abilities of the mortar.
We also offer tailored formulation to best suit your specific raw materials and special local requirements.
01.Extended open time and wettability.
02.Improved workability without sticking trowel
03. Improved adhesive strength and slip-resistance.
04. Enhanced sag-resistance and water retention